1. The bit rate of the digital communication system is M kbps. The modulation used is 16 QAM. The minimum bandwidth required for ideal transmission is _________. M/2 kHz M/16 kHz M kHz M/8 kHz 2. Arrange in increasing order of Null-to-Null bandwidth (Hz) of the following binary bandpass signals. (i) QPSK (ii) MSK …
Bandpass Modulation MCQ || Bandpass Modulation Questions and Answers Read More »
1. Following type of multiplexing cannot be used for analog signaling? FDM TDM WDM None of these 2. Determine the number of bits/sec generated by a PCM system if the bandwidth of TV video and audio signal of 4.5 MHz is to be converted to PCM stream with 1024 quantization levels. Assume signal is …
Baseband Transmission MCQ || Baseband Transmission Questions and Answers Read More »
1. Following type of multiplexing cannot be used for analog signaling? FDM TDM WDM None of these 2. Determine the number of bits/sec generated by a PCM system if the bandwidth of TV video and audio signal of 4.5 MHz is to be converted to PCM stream with 1024 quantization levels. Assume signal is …
1. In digital transmission, the modulation technique that requires the minimum bandwidth is: PCM PAM DPCM Delta modulation 2. (DPCM) is a procedure of converting an _____ to ______ Digital to Analog Analog to Digital Digital to Discrete None of the above 3. DPCM compression depends on the ______ technique. Sampling Amplifying Prediction …
1. Quantizing noise occurs in PCM TDM FDM PPM 2. A telephone signal with a cut-off frequency of 4 kHz is digitalized into 8-bit samples at a Nyquist sampling rate of s = 2 W. Calculate the baseband transmission bandwidth. 8 kHz 64 kHz 16 kHz 2 kHz 3. The main advantage of …
Pulse Code Modulation (PCM) System MCQ || Pulse code Modulation Questions And Answers Read More »
1. Which of the following type of multiplexing cannot be used for analog signaling? FDM TDM WDM None of these 2. In TDM systems, channel separation is done with the use of AND gates Bandpass filter Differentiator circuit Integrator circuit 3. To transmit N signals each band limited to fm Hz by time-division …
TDM and FDM MCQ || TDM and FDM Questions and Answers Read More »
1. Which of the following type of multiplexing cannot be used for analog signaling? FDM TDM WDM None of these 2. In TDM systems, channel separation is done with the use of AND gates Bandpass filter Differentiator circuit Integrator circuit 3. To transmit N signals each band limited to fm Hz by time-division …
Time Division Multiplexing (TDM) MCQ || TDM Questions and Answers Read More »
1. The bit rate of the digital communication system is M kbps. The modulation used is 16 QAM. The minimum bandwidth required for ideal transmission is _________ M/2 kHz M/16 kHz M kHz M/8 kHz 2. Assertion (A): In microwave communication links, intensive fading at the 18 GHz band occurs due to rain-drop attenuation. …
Microwave Engineering MCQ || Microwave Engineering Questions and Answers Read More »
1. In LTE network architecture, the interface between the internet and PDN gateway is: Um SS7 S5 SGi 2. What is Mobile communication? Allows to communicate from different locations without the use of physical medium Allows to communicate from different locations with the use of physical medium Allows to communicate from same locations without …
Wireless Communication MCQ || Wireless Communication Questions and Answers Read More »
