SSC previous year solved electrical papers

SSC JE electrical Mock Test Paper 2019| MES Electrical

SSC JE electrical Mock Test Paper 2019| MES Electrical  Ques.1. In a suspension insulator string, each disc insulator is designed for a low voltage of 11 kV. What is the maximum number of disc insulators required for 143 kV/phase transmission? 4 6 12 13   Ques.2. What will be the AC generator frequency, if the generator has 30 …

SSC JE electrical Mock Test Paper 2019| MES Electrical Read More »

SSC-2016

SSC JE Electrical question paper with solution 2016 -Set-3

SSC JE Electrical question paper with solution 2016 -Set-3 Ques.1. The waveform of the armature m.m.f. in DC machine is Triangular✓ Square Rectangular Sinusoidal   Ques.2. The current flowing in the conductors of a DC motor is D.C A.C✓ D.C as well as A.C Transients   Ques.3. DC shunt generator has Slightly drooping characteristic curve✓ Appreciably rising characteristic …

SSC JE Electrical question paper with solution 2016 -Set-3 Read More »

SSC-2016

SSC JE 2016 Electrical question paper (Set-2)

SSC JE 2016 Electrical question paper with solution(Set-2)| MES Electrical Ques.1. Steel poles are generally used for transmission lines because (A) It has more mechanical strength and more life. (B) It occupies less space and gives a better appearance. (C) It has a high cost. Which of the above provided reasons is/are correct. Only A Only …

SSC JE 2016 Electrical question paper (Set-2) Read More »

SSC JE 2014 Electrical question paper with solution(Morning-Shift)

SSC JE electrical paper 2014 Morning shift with explanation |MES Electrical   Ques 1. A lamp having mean spherical candle power of 800 is suspended at a height of 10 m. Calculate the illumination just before the lamp 8000 lux 8 lux✔ 80 lux 800 lux   Ques 2. Hydrogen is used in large alternators mainly to …

SSC JE 2014 Electrical question paper with solution(Morning-Shift) Read More »

SSC JE 2010 Electrical question paper with Solution

SSC JE 2010 Electrical question paper with Explained Solution | MES Electrical Ques 1. The value of voltage across the diode in the figure given below is 0 Volt 4 Volt 8 Volt✔ Depend upon the value of R   Ques 2. The temperature coefficient of an intrinsic semiconductor is Zero Positive Negative✔ Like this of Metal …

SSC JE 2010 Electrical question paper with Solution Read More »

SSC JE 2014 Electrical question paper with solution(Evening-shift)

SSC JE electrical paper 2014 Evening shift with explanation| MES Electrical Ques1. A stove element draws 15A when connected to 230 V line. How long does it take to consume one unit of energy? 3.45 h 2.16 h 1.0 h 0.29 h✔   Ques 2. The Req for the circuit shown in figure is 14.4 Ω …

SSC JE 2014 Electrical question paper with solution(Evening-shift) Read More »

SSC JE 2011 Electrical question paper with Solution

SSC JE 2011 Electrical question paper with Explained Solution | MES Electrical Ques 1. If in an R-L-C series circuit the current lags the applied voltage by 60° then XL – Xc = R/√3 XL – Xc = √3R✔ XL = Xc = R XL – Xc = R   Ques2. A lossy capacitor with loss angle of 0.01 radian, …

SSC JE 2011 Electrical question paper with Solution Read More »

SSC JE 2012 Electrical question paper with solution

SSC JE 2012 Electrical question paper with Explained Solution | MES Electrical Ques 1. The emf induced per phase in a three-phase star connected synchronous generator having the following data Distribution factor = 0.955 Coil-span factor = 0.966 Frequency = 50 Hz Flux per pole = 25 mwb Turns per phase = 240, then emf per …

SSC JE 2012 Electrical question paper with solution Read More »

SSC JE electrical question paper explained 2016-2017

SSC JE Electrical Question paper 2017 Solved | MES Electrical Ques 1. Two 10 ohm resistance is connected in parallel, their effective resistance will be 5 10 7 None of the above   Ques 2. In a 3-phase half-wave rectifier, if the input phase voltage is 200 V, the PIV required for each diode will be 400 …

SSC JE electrical question paper explained 2016-2017 Read More »

Scroll to Top