Integrated Circuit Pin Configuration MCQ [Free PDF] – Objective Question Answer for Integrated Circuit Pin Configuration Quiz

11. Which of the following belongs to special purpose op-amp?

A. LM741
B. LM380
C. IC351
D. None of the mentioned

Answer: B

LM380 is a special purpose op-amp, used only for audio power applications.

 

12. How many op-amps will be present in a typical op-amp package?

A. Three
B. Four
C. Five
D. Nine

Answer: B

Op-amp package IC consists of single, dual (two) or Four (quaD. op-amps.

 

13. Find out the op-amp which does not have the same specifications and behavior as that of N5741?

A. MC1741
B. CA3741
C. SN52741
D. None of the mentioned

Answer: D

All these op-amps have the same specifications and behave the same because the last three digits in each manufacturer designation are 741. For example, Fairchild’s original µA741 is also manufactured by various other manufacturers under their own designation.

 

14. The op-amps 741C and 741E are identical to op-amps

A. 741s and 741A
B. 741 and 741A
C. 741A and 741Sc
D. 741 and 741S

Answer: B

The 741C and 741E are identical to 741 and 741A except that the former have their performance guaranteed over a temperature range 0° to 70° or 75°c.

 

15. Which of the following is a military-grade op-amp?

A. 741
B. 741C
C. 741S
D. 741SC

Answer: C

The 741S is a military-grade op-amp with a higher slew rate (rate of change of output voltage per unit of time) than the 741 op-amps.

 

16. Which of the following is incorrect? “First-generation op-amp ”

A. Consists of a hundred transistors/chip
B. Requires an external frequency compensating network for stable operation
C. Have short circuit protection
D. Has the latch-up problem

Answer: C

The first-generation op-amp has no short circuit protection. The op-amp is susceptible to burnout if the output is accidentally shorted to the ground.

 

17. What is the disadvantage of an integrated circuit?

A. Parameter within the IC cannot be modified
B. Low power requirement
C. ICs are considered to use the minimum number of external connections
D. None of the mentioned

Answer: A

The disadvantage of IC is that, a lack of flexibility in an IC. It is generally not possible to modify the parameters within which an integrated circuit will operate.

 

18. Whenever an IC is designed manufacturers use a

A. Specific code and manufacturer’s name
B. Specific code and specific type number
C. Specific code and specific value
D. Specific type number

Answer: B

Each manufacturer uses a specific code and assigns a specific type number to the ICs produced. That is, each manufacturer uses its own identifying initial followed by an IC type number.

 

19. General purpose op-amp cannot be used for the application

A. Integrator
B. Audio power amplifier
C. Differentiation
D. Summing amplifier

Answer: B

The audio power amplifier is a special purpose op-amp and is used only for the specific application they are designed for.

 

20. Low volume production methods are best suited to hybrid IC technology because

A. It requires a stipulated temperature to fabricate a circuit
B. It requires several steps to fabricate a circuit
C. It requires large components to fabricate a circuit
D. It requires various designers to fabricate a circuit

Answer: B

In hybrid IC first the individual components are made, wired or metallic interconnection is done and finally, they are diffused to form a single circuit.

 

21. Which is the different version of IC 741C?

A. 741A
B. 741E
C. 741S
D. 741SC

Answer: D

741SC is the different version of 741C IC, which is a commercial-grade op-amp with a higher slew rate and operates in the same temperature range.

 

22. An example of second-generation IC used in the greatest percentage of application

A. µA748
B. MC1558
C. µA741
D. LM101

Answer: C

All the IC belongs to second generation op-amp. In that general-purpose op-amp’741’ is used widely in the greatest percentage of applications.

 

23. What is the advantage of a Hybrid Integrated Circuit?

A. Miniaturized circuits are made of individual components
B. Insulate components by protection
C. Circuit designer can choose the component value
D. All of the mentioned

Answer: D

In a hybrid integrated circuit, miniaturization can be achieved and allow the circuit designer complete freedom in choosing the resistor values, whereas a monolithic IC cannot use some important components in construction.

 

24. Find the pin configuration of µA741operational amplifier?

  1. 8-Pin
  2. 16-Pin
  3. 12-Pin
  4. 4-Pin
Answer: A

The metal can configuration of µA741 op-amp has eight pins with pin number 8 identified by a tab. The other pins are numbered counter-clockwise from pin 8, beginning with pin1.

 

25. How many sets of electrical specifications are there for 741C op-amp?

A. Five
B. Eight
C. Two
D. Ten

Answer: C

There are two sets of electrical specifications. One set of specifications applies at room temperature of 25oC, whereas the other set applies to the commercial temperature range from 0 to 70oC.

 

26. Calculate the input offset current from the circuit shown below:

A. +1.55mA
B. ±1.55mA
C. -1.55mA
D. None of the mentioned

Answer: A

The algebraic difference between the current into the inverting and non-inverting terminal is referred to as input offset current.

Iio = |IB1-IB2| =|3.2 – 4.75|=|-1.55|

=> Iio = +1.55mA.

 

27. What is the value of current drawn from power supply 741c op-amp?

A. Is = 1.5mA
B. Is = 3.2mA
C. Is = 4.0mA
D. Is = 2.8mA

Answer: A

Supply current is the current drawn by the op-amp from the power supply; this parameter is not given on most op-amp data. For 741c op-amp, the supply current Is=2.8mA response.

 

28. Which is a time-varying response?

A. Steady-state response
B. Transient response
C. Both Steady-state and transient response
D. None of the mentioned

Answer: B

The rise time and percentage of overshoot are the characteristics of transient response.

Scroll to Top