# Linear Phase FIR Filter Design Method Comparison MCQ [Free PDF] – Objective Question Answer for Linear Phase FIR Filter Design Method Comparison Quiz

1. Which of the following is the first method proposed for the design of FIR filters?

A. Chebyshev approximation
B. Frequency sampling method
C. Windowing technique
D. None of the mentioned

The design method based on the use of windows to truncate the impulse response h(n) and obtain the desired spectral shaping, was the first method proposed for designing linear phase FIR filters.

2. The lack of precise control of cutoff frequencies is a disadvantage of which of the following designs?

A. Window design
B. Chebyshev approximation
C. Frequency sampling
D. None of the mentioned

The major disadvantage of the window design method is the lack of precise control of the critical frequencies.

3. The values of cutoff frequencies in general depend on which of the following?

A. Type of the window
B. Length of the window
C. Type & Length of the window
D. None of the mentioned

The values of the cutoff frequencies of a filter in general by the windowing technique depend on the type of the filter and the length of the filter.

4. In the frequency sampling method, the transition band is a multiple of which of the following?

A. π/M
B. 2π/M
C. π/2M
D. 2πM

In the frequency sampling technique, the transition band is a multiple of 2π/M.

5. The frequency sampling design method is attractive when the FIR filter is realized in the frequency domain by means of the DFT.

A. True
B. False

The frequency sampling design method is particularly attractive when the FIR is realized either in the frequency domain by means of the DFT or in any of the frequency sampling realizations.

6. Which of the following values can a frequency response take in the frequency sampling technique?

A. Zero
B. One
C. Zero or One
D. None of the mentioned

The attractive feature of the frequency sampling design is that the frequency response can take either zero or one at all frequencies, except in the transition band.

7. Which of the following technique is more preferable for the design of a linear phase FIR filter?

A. Window design
B. Chebyshev approximation
C. Frequency sampling
D. None of the mentioned

The Chebyshev approximation method provides total control of the filter specifications, and as a consequence, it is usually preferable to the other two methods.

8. By optimal filter design, the maximum sidelobe level is minimized.

A. True
B. False

By spreading the approximation error over the passband and stopband of the filter, this method results in an optimal filter design and using this the maximum sidelobe level is minimized.

9. Which of the following is the correct expression for transition band Δf?

A. (ωp– ωs)/2π
B. (ωp+ωs)/2π
C. (ωp.ωs)/2π
D. (ωs– ωp)/2π

The expression for Δf i.e., for the transition band is given as
Δf=(ωs-ωp)/2π.

10. If the resulting δ exceeds the specified δ2, then the length can be increased until we obtain a side lobe level that meets the specification.

A. True
B. False