# Link Budget Error Control MCQ [Free PDF] – Objective Question Answer for Link Budget Error Control Quiz

1. Field of view is ______ to antenna gain.

A. Proportional
B. Inversely proportional
C. Half the
D. Double

The antenna field of view is the measure of a solid angle in which most of the field power is concentrated. It is inversely related to antenna gain.

2. Antenna gain ______ as effective area increases.

A. Increases
B. Decreases
C. Remains same
D. None of the mentioned

Antenna gain increases with a decrease in wavelength increase in frequency and increase in effective area.

3. The beam width becomes narrower on

A. Increasing frequency
B. Increasing antenna size
C. Increasing frequency & antenna size
D. None of the mentioned

Increasing either the signal frequency or antenna size results in narrower beam width.

4. Path loss Ls are dependent on

A. Signal power
B. Effective area
C. Wavelength
D. Antenna size

The path loss is wavelength(frequency) dependent.

5. Thermal noise is generated due to

A. Lossy coupling
B. Lossless coupling
C. Lossy & Lossless coupling
D. None of the mentioned

Thermal noise occurs due to the thermal motion of electrons in all conductors. It occurs due to lossy coupling between an antenna and the receiver.

6. In analog receivers, noise bandwidth is _________ signal bandwidth.

A. Lesser than
B. Greater than
C. Equal to
D. Not related

With analog receivers, the noise bandwidth seen by the demodulator is usually greater than the signal bandwidth.

7. The link availability measures the percentage of time the link can be ______

A. Open
B. Closed
C. Used
D. None of the mentioned

Link availability is the measure of long-term link utility stated on an average annual basis for a given geographical location, the link availability measures the percentage of time the link can be closed.

8. Visibility is ________ to required availability.

A. Proportional
B. Inversely proportional
C. Equal
D. Not related

For a fixed link margin, visibility is inversely proportional to the required availability, and for a fixed availability, visibility increases monotonically with margin.

9. The stop and wait ARQ needs a _______ connection.

A. Half-duplex
B. Full duplex
C. Simplex
D. None of the mentioned

The stop and wait ARQ needs a half-duplex system since the transmitter needs ACK for each transmission.

10. In continuous ARQ will pullback uses _____ system.

A. Half-duplex
B. Full duplex
C. Simplex
D. None of the mentioned