Parallel Port MCQ Quiz – Objective Question with Answer for Parallel Port

1. Which of the following can transfer multiple bits of data simultaneously?

A. serial port
B. sequential port
C. concurrent unit
D. parallel port

Answer: D

The parallel port can transfer multiple bits of data simultaneously. It provides the input or output binary data with a single bit allocated to each pin within the port.

 

2. Which of the following are interfaced as inputs to the parallel ports?

A. LEDs
B. switch
C. alphanumeric display
D. seven segmented display

Answer: B

The LEDs, alphanumeric displays, and seven-segment displays are interfaced for the output whereas the switch is an input port.

 

3. Which of the following are interfaced as the outputs to the parallel ports?

A. keyboards
B. switches
C. LEDs
D. knobs

Answer: C

The keyboards, switches, and knobs are used as output whereas the LEDs are used as the input port.

 

4. How many registers are there to control the parallel port in the basic form?

A. 1
B. 3
C. 2
D. 5

Answer: C

The basic operation of the parallel port deals with two types of registers which are called the data direction register and the data register.

 

5. Which of the following is also known as tri-state?

A. output port
B. input port
C. parallel port
D. output-input port

Answer: A

The progression in the parallel ports provides a third register or an individual control bit which can make the pin in a high impedance state. An output port that can do this is also known as tri-state, that is, logic high, logic low, and a high impedance state.

 

6. How buffers are enabled in the parallel ports?

A. by the data register
B. by data direction register
C. by individual control register
D. by data and individual control register

Answer: B

The implementation of a parallel port uses a couple of buffers which are enabled by the data direction register by setting the corresponding bit of the register.

 

7. Which of the following registers offers high impedance?

A. data register
B. data direction register
C. individual control bit
D. data register and data direction register

Answer: C

The register which offers high impedance is the individual control bit or the third register which can be implemented by switching off both the buffers and putting their connections to the pin which offers high impedance.

 

8. Which of the following can be used as a chip select?

A. multifunction I/O port
B. parallel port
C. DMA port
D. memory port

Answer: A

The multifunction I/O port can also be used as a chip select for the memory design. The function that the pin performs is set up internally through the use of a function register which internally configures how the external pins are connected internally.

 

9. Which of the following is necessary for the parallel input-output port?

A. inductor
B. pull-up resistor
C. push-up resistor
D. capacitor

Answer: B

The I/O port needs an external pull-up resistor. In some devices, it offers internally. If it is not provided, it can cause incorrect data on reading the port and it prevents the port from turning off an external device.

 

10. Which of the following can be described as general-purpose?

A. multifunction I/O port
B. input port
C. DMA port
D. output port

Answer: A

The multifunction I/O ports can be described as general-purpose and can be shared with other peripherals.

Scroll to Top